Product Type
The "S" in the model number may indicate that the bearing rings or components are made of stainless steel, providing good corrosion resistance, making it suitable for damp or corrosive environments
.
Model Number Analysis
UCP: This is a common series designation, representing an insert bearing unit with an eccentric locking collar and a pillow block (square base)
.A: May indicate a specific housing type or design variant.
205: This specifies the size series of the core bearing. The "05" typically corresponds to a bearing bore diameter of 25 mm (calculation: 05 × 5 = 25mm)
.Based on the above interpretation and information from similar products, the possible key dimensional parameters for the SUCPA205 are listed in the table below. Please note that the following are estimated values; accurate dimensions should be confirmed with official technical drawings.
Parameter Item | Estimated Value | Reference Explanation |
|---|---|---|
Bore Diameter | 25 mm | Deduced from the size series "205". |
Bearing Outside Diameter | Approx. 52 mm | Based on common dimensions of similar UCPA205 models . |
Total Height | Approx. 72 mm | Based on common dimensions of similar UCPA205 models . |
Mounting Hole Spacing | Approx. 70-80 mm | Common range for square base mounting holes. |
Typical Application Scenarios
These bearing units are widely used in power transmission parts of various industries due to their easy installation and low maintenance requirements
:
Agricultural machinery: Such as conveyor systems, harvesters, etc.
Conveying systems: Belt conveyors, roller lines, etc.
Food processing equipment: Suitable for applications requiring hygiene and corrosion resistance.
Other industrial fields: Suitable for environments with medium loads and speeds.
